Safety Instruction Guide for SERIES I STONING FIXTURE POWER CUSTOM 77/22 ADAPTER
Introduction
Thank you for choosing the SERIES I STONING FIXTURE POWER CUSTOM 77/22 ADAPTER, designed for use with the Ruger 77/22 M77 MKII. This product is engineered to provide accurate and repeatable setups for stoning processes. To ensure your safety and the effective use of this product, please read and follow the safety instructions outlined in this guide.
General Safety Guidelines
- Ensure the product is used only for its intended purpose as specified in the product description.
- Always operate the fixture in a wellventilated area.
- Keep the fixture and all accessories out of reach of children and vulnerable individuals.
- Regularly inspect the fixture for any signs of wear or damage before use.
- Store the fixture in a dry place to prevent rust and deterioration.
- Use appropriate personal protective equipment (PPE) such as safety glasses and gloves while operating the fixture.
Specific Safety Precautions for Use
- Always ensure that the fixture is securely mounted before use to prevent accidents.
- Do not exceed the recommended stoning angle; refer to the detailed instructions provided.
- Avoid placing hands near the stoning guide or stone during operation to minimize the risk of injury.
- Ensure that all adjustments are locked in place before commencing work.
- Never use the fixture if it appears to be malfunctioning or if any components are missing.
- Be aware of the weight of the fixture (5 3/4 lb. or 2.6 kg) when lifting or moving it.
Instructions for Installation and Usage
Preparation
- Gather all necessary tools and materials, including a #10 Machinist’s Clamp and 6"x½"x½" stones.
- Ensure that the work area is clean and free from clutter.
Mounting the Fixture
- Securely mount the fixture to a stable work surface using the #10 Machinist’s Clamp.
- Ensure the fixture is level and stable before proceeding.
Setting Up the Adapter
- Select the appropriate adapter for the Ruger 77/22 M77 MKII.
- Mount the hammer or trigger/sear onto the adapter as instructed.
- Set and lock the adapter at the correct index mark.
Adjusting the Stoning Angle
- Adjust the stoning angle by counting the specified “clicks” to raise or lower the elevator and stoning guide.
- Lock the guide in place securely.
Stoning Process
- Place the stone on both the roller and the hammer or trigger/sear.
- Stone as normal, ensuring hands are kept clear of moving parts.
- Make adjustments as necessary to achieve the desired trigger pull weight.
PostUse Care
- After use, clean the fixture and stone to remove any debris.
- Store the fixture and all accessories in a safe location.
Disposal Instructions
- Dispose of the fixture and any accessories in accordance with local regulations.
- If the product is no longer usable, consider recycling options for metal components where available.
Contact Information for Further Support
For any questions or concerns regarding the use of the SERIES I STONING FIXTURE POWER CUSTOM 77/22 ADAPTER, please refer to the manufacturer’s contact information provided with your product.
By following these safety instructions, you can ensure a safe and effective experience with the SERIES I STONING FIXTURE POWER CUSTOM 77/22 ADAPTER. Thank you for your attention to safety and proper usage.