PACESETTER RIFLE THREEDIE SET SAFETY INSTRUCTIONS
Introduction
Thank you for choosing the PACESETTER RIFLE THREEDIE SET by LEE PRECISION. This product is designed to provide you with the tools necessary for reloading 7.5 x 55 mm Swiss cartridges. To ensure safe and effective use of this product, please read and follow the safety instructions outlined in this guide.
General Safety Guidelines
- Ensure that your reloading area is clean, welllit, and free from distractions.
- Always wear appropriate safety gear, including safety glasses and gloves, when handling reloading equipment.
- Keep all reloading materials, including powder and primers, out of reach of children and pets.
- Store all components in a cool, dry place to prevent deterioration.
- Familiarize yourself with the reloading press and all components of the die set before use.
- Follow all local laws and regulations regarding ammunition reloading.
Specific Safety Precautions for Use
- Always doublecheck that the correct die is installed before use.
- Avoid overloading cartridges; refer to load data for recommended specifications.
- Never use damaged or worn components; inspect dies and tools before each use.
- Do not attempt to modify or repair any component of the die set.
- If you experience any unusual noises or resistance while reloading, stop immediately and investigate the cause.
Instructions for Installation and Usage
Installation of the Die Set:
- Ensure your reloading press is securely mounted and stable.
- Remove the lock nut from the Full Length Sizing Die.
- Insert the Full Length Sizing Die into the press and tighten the lock nut securely.
- Repeat the process for the Bullet Seating Die and Factory Crimp Die, ensuring each die is correctly positioned.
Using the Die Set:
- Start with the Full Length Sizing Die to resize your brass cases.
- Follow with the Bullet Seating Die to seat the bullets to the desired depth.
- Finally, use the Factory Crimp Die to apply a crimp to the cartridge.
- Use the Universal Shell Holder to securely hold the cartridge cases during the reloading process.
Using the Powder Dipper:
- Use the provided Powder Dipper for measuring the correct amount of powder.
- Always verify the weight of the powder charge with a scale.
Load Data:
- Refer to the provided instructions for specific load data and recommendations for the 7.5 x 55 mm Swiss cartridge.
Disposal Instructions
- Dispose of any unused or excess reloading materials in accordance with local regulations.
- Do not throw away hazardous materials in regular trash; check for local disposal facilities that handle hazardous waste.
- Recycle metal components where possible.
Contact Information for Further Support
For questions regarding safety, usage, or product support, please refer to the contact information provided with your product packaging or visit the manufacturer's website.
By following these safety instructions, you can ensure a safe and enjoyable reloading experience with your PACESETTER RIFLE THREEDIE SET. Always prioritize safety and remain informed about best practices in reloading. Thank you for your attention to these important guidelines.