MIL/LE PISTOL CLEANING KIT DEWEY Safety Instructions
Introduction
Thank you for choosing the MIL/LE PISTOL CLEANING KIT DEWEY. This kit is designed for the basic cleaning of service pistols in various calibers, specifically for military and law enforcement use. Please read this safety instruction guide carefully to ensure safe and effective use of the product.
General Safety Guidelines
- Always handle firearms with care and ensure they are unloaded before cleaning.
- Keep the cleaning kit and all its components out of reach of children and unauthorized users.
- Use the cleaning kit only for its intended purpose as outlined in this guide.
- Inspect all components of the cleaning kit before use for any signs of damage or wear.
- If you notice any defects, do not use the product and contact customer support for assistance.
- Follow all local laws and regulations regarding firearm maintenance and cleaning.
- Store the cleaning kit in a cool, dry place away from direct sunlight and moisture.
Specific Safety Precautions for Use
- Always wear safety glasses when cleaning firearms to protect your eyes from debris.
- Use gloves to avoid skin contact with cleaning solvents and oils, as they may cause irritation.
- Ensure the cleaning area is wellventilated to avoid inhaling fumes from cleaning products.
- Do not ingest any cleaning products or allow them to come into contact with food or beverages.
- Keep the cleaning products away from open flames or heat sources, as they may be flammable.
- Do not mix different cleaning solvents, as this may create hazardous reactions.
Instructions for Installation and Usage
Preparation
- Ensure that the firearm is unloaded and pointed in a safe direction.
- Assemble all components of the cleaning kit on a clean, flat surface.
Cleaning Process
- Attach the 6" brass cleaning rod to the brass loop.
- Insert the bronze bore brush into the cleaning rod and apply a small amount of Shooter's Choice FP10 cleaner to the brush.
- Insert the brush into the barrel and gently scrub the interior, taking care to protect the rifling.
- Remove the brush and replace it with a cotton flannel patch attached to the brass loop to wipe down the barrel.
- Repeat the process until the patches come out clean.
- Use the doubleended nylon parts brush to clean other components of the firearm as needed.
PostCleaning
- Wipe down the exterior of the firearm with the siliconeimpregnated wipedown cloth.
- Apply a light coat of Shooter's Choice FP10 for lubrication.
- Store all components back in the zippered storage pouch.
Disposal Instructions
- Dispose of used cleaning patches and any waste materials in accordance with local regulations.
- Do not dispose of cleaning solvents in regular trash or down the drain; follow local hazardous waste disposal guidelines.
- Keep the packaging and any unused components in a safe place until you confirm they are no longer needed.
Contact Information for Further Support
For any inquiries regarding the MIL/LE PISTOL CLEANING KIT DEWEY, including safety concerns or product support, please refer to the relevant contact resources provided with your product.
Thank you for your attention to these safety guidelines, and enjoy using your cleaning kit responsibly.