MILCOMM WEAPONS GREASE Safety Instruction Guide
Introduction
Welcome to the safety instruction guide for MILCOMM WEAPONS GREASE, specifically the TW25B Grease and MC25 Cleaner Degreaser. This guide provides essential information to ensure the safe and effective use of these products. Please read this guide carefully before using the products.
General Safety Guidelines
- Ensure that all products are kept out of reach of children and vulnerable individuals.
- Store the products in a cool, dry place, away from direct sunlight and heat sources.
- Use the products only for their intended purposes as specified in this guide.
- Always read labels, warnings, and instructions before using any product.
- In case of any adverse reactions or accidents, seek medical attention immediately.
Specific Safety Precautions for Use
TW25B Grease:
- Avoid contact with eyes. In case of contact, rinse thoroughly with water and seek medical advice.
- Use gloves when applying the grease to prevent skin irritation.
- Ensure adequate ventilation when using the product in enclosed spaces.
- Do not ingest. If swallowed, seek medical attention immediately.
MC25 Cleaner Degreaser:
- Use in a wellventilated area to avoid inhalation of vapors.
- Avoid contact with skin and eyes. Use protective gloves and goggles when necessary.
- Do not mix with other cleaning products or chemicals, as this may cause hazardous reactions.
- Dispose of any excess product responsibly and according to local regulations.
Instructions for Installation and Usage
TW25B Grease
- Preparation: Clean the surface of the firearm or component to be lubricated.
- Application:
- Use the resealable syringe or squeeze tube to apply a small amount of grease to the required areas.
- Focus on heavy wear parts and exposed areas.
- Bore Protection: For bore protection, apply a thin layer of grease inside the bore.
- Storage: Reseal the container after use to maintain product integrity.
MC25 Cleaner Degreaser
- Preparation: Ensure the firearm is unloaded and placed in a safe area.
- Application:
- Shake the pump spray bottle well before use.
- Spray the cleaner directly onto the lubricated areas or surfaces with burntin powder residue.
- Cleaning: Allow the cleaner to sit for a few moments to break down residues, then wipe with a clean cloth.
- Rinse: If necessary, rinse surfaces with water after cleaning.
- Storage: Store the cleaner in its original container, tightly closed, and in a cool, dry place.
Disposal Instructions
- Dispose of any unused or expired product in accordance with local regulations.
- Do not pour products down the drain or into the environment.
- Check with local waste management for proper disposal methods.
Contact Information for Further Support
For any safety inquiries or additional support regarding the use of MILCOMM WEAPONS GREASE products, please consult the product packaging for the EUbased contact information or visit the manufacturer's website. Ensure to keep the receipt and product details for reference.
Conclusion
By following these safety instructions, you can ensure a safe and effective experience with MILCOMM WEAPONS GREASE products. Remember to prioritize safety and adhere to all guidelines provided. Thank you for choosing MILCOMM products.