Safety Instruction Guide for FELT POLISHING WHEELS
Introduction
Thank you for choosing the FELT POLISHING WHEELS by Bacon Felt Company. This guide provides essential safety instructions to ensure the safe and effective use of the product. Please read this guide thoroughly before using the polishing wheels.
General Safety Guidelines
- Ensure that the polishing wheels are used only for their intended purpose.
- Always wear appropriate personal protective equipment (PPE), including safety goggles and dust masks, when using the polishing wheels.
- Keep the work area clean and welllit to prevent accidents.
- Store the polishing wheels in a dry place, away from direct sunlight and moisture.
- Regularly inspect the polishing wheels for any signs of damage or wear. Do not use damaged wheels.
- Ensure that all power tools used with the polishing wheels are in good working condition and are used according to the manufacturer’s instructions.
Specific Safety Precautions for Use
- Use the polishing wheels at the recommended speeds:
- For 1/2 hp or under, use 6" wheels at 3600 RPM.
- For 1/2 hp or over, use 8" wheels at 1800 RPM.
- For 3/4 hp or over, use 10" wheels at 1800 RPM (10" wheels are for experienced polishers only).
- Always select the appropriate wheel for the polish grit being used. It is best to use a different wheel for each polish grit.
- Avoid overloading the polishing wheels; excessive pressure can lead to damage or accidents.
- Do not exceed the recommended RPM for the wheels to prevent accidents and ensure a safe working environment.
- Ensure that the arbor size of the polishing wheels matches the tool being used. Adapters are provided to convert to different arbor sizes (1/2", 5/8", 3/4", and 7/8").
- Keep hands and loose clothing away from the polishing wheels while in operation.
Instructions for Installation and Usage
Preparation:
- Before installation, ensure that the power tool is unplugged.
- Select the appropriate polishing wheel and adapter if necessary.
Installation:
- Attach the polishing wheel to the power tool's arbor, ensuring a secure fit.
- If using an adapter, insert it into the arbor before attaching the polishing wheel.
Usage:
- Plug in the power tool and allow the polishing wheel to reach the recommended speed before applying it to the workpiece.
- Apply light pressure when polishing to achieve the best finish without damaging the wheel or the workpiece.
- Frequently check the polishing wheel for wear and replace it as necessary.
PostUse:
- Unplug the power tool after use.
- Clean the polishing wheels and store them properly to maintain their quality.
Disposal Instructions
- Dispose of the polishing wheels in accordance with local regulations.
- Do not incinerate or dispose of in regular household waste.
- If the polishing wheels are damaged or worn out, contact your local waste management authority for guidance on proper disposal methods.
Contact Information for Further Support
For any safety inquiries or support, please refer to the contact information provided with your product packaging. It is important to have access to assistance in case of any questions or concerns regarding the use of the polishing wheels.
By following these safety instructions, you can ensure a safe and effective experience while using the FELT POLISHING WHEELS. Thank you for your attention to safety and for choosing our product.