Over 300,000 customers - we say thank you!

40,000+ products for hunting and shooting sports

BROWNELLS CERROSAFE CHAMBER CASTING ALLOY 1LB

050806011908 080027100
Variations
Filters:
Variations:

Variations:

CERROSAFE CHAMBER CASTING ALLOY 1LB
42.49 EUR 42,49 € *
Reordered
Product no.: 080027100
Reordered
42.49 EUR 42,49 € *
CERROSAFE CHAMBER CASTING ALLOY 1/2LB
25.95 EUR 102 25,95 € *
In stock
Product no.: 080027050
In stock
25.95 EUR 102 25,95 € *
25.95 42.49 2 EUR
42.49 EUR 42,49 €

Prices incl. VAT, plus delivery

Product no.: 080027100

050806011908 There are various products on the market which can be used to make a cast of a gun chamber. To be certain that the product we are offering you is the best and most practical, we contacted the basic manufacturer. They recommended Cerrosafe because of its unique features. Unlike Woodsmetal which swells upon cooling and cannot be removed from a gun chamber, Cerrosafe shrinks during the first 30 minutes of cooling and then at the end of an hour, is EXACTLY chamber size. At the end of 200 hours it will have expanded approximately .0025". This factor is well known by all toolmakers and they will take it into consideration when making dies or reamers or gauges from your cast - if you will tell them the cast is of Cerrosafe. Cerrosafe melts between 158° - 190° F. It should be melted in a clean, iron ladle. Source of heat should be removed as soon as the alloy is completely melted, at which time it is ready to pour. The solidified casting should be removed from the chamber before, or when, it cools to room temperature. If allowed to remain in the mold over an hour, it will grip the chamber walls and be difficult to remove. Clean the chamber of the rifle thoroughly, then plug the bore immediately ahead of the throat with a small rag - but not so tightly it cannot be driven out. If possible, pour the molten Cerrosafe through a small tube into the bottom of the cast, gradually removing the tube as the chamber fills. If the barrel is cold, warm it to room temperature or above before making the cast. When cooled, remove from chamber, using a rod or dowel from the muzzle end of the gun.
Reordered
1
2
3
4
5
6
7
8
9
10+
42,49 €

Prices incl. VAT, plus delivery

1
2
3
4
5
6
7
8
9
10+

Backordered, delivery time approx. 4-12 weeks from the USA warehouse.

Backordered, delivery time approx. 4-12 weeks from the USA warehouse.

No charges until we ship
No charge:
Your credit card will not be charged when you place your order.

No commitments:
You are under no obligation until the goods are shipped. You can cancel your order at any time before shipping - free of charge.

Not until shipping:
Your credit card will only be charged once we ship your order. Not before.
25.95 42.49 2 EUR
Description Specification Customers reviews Accessories

BROWNELLS CERROSAFE CHAMBER CASTING ALLOY 1LB

42.49 EUR 42,49 €

Prices incl. VAT, plus delivery

1
2
3
4
5
6
7
8
9
10+
42,49 €

Prices incl. VAT, plus delivery

1
2
3
4
5
6
7
8
9
10+

Backordered, delivery time approx. 4-12 weeks from the USA warehouse.

Description:

Never Wears Out- Use Over And Over
There are various products on the market which can be used to make a cast of a gun chamber. To be certain that the product we are offering you is the best and most practical, we contacted the basic manufacturer. They recommended Cerrosafe because of its unique features. Unlike Woodsmetal which swells upon cooling and cannot be removed from a gun chamber, Cerrosafe shrinks during the first 30 minutes of cooling and then at the end of an hour, is EXACTLY chamber size. At the end of 200 hours it will have expanded approximately .0025". This factor is well known by all toolmakers and they will take it into consideration when making dies or reamers or gauges from your cast - if you will tell them the cast is of Cerrosafe. Cerrosafe melts between 158° - 190° F. It should be melted in a clean, iron ladle. Source of heat should be removed as soon as the alloy is completely melted, at which time it is ready to pour. The solidified casting should be removed from the chamber before, or when, it cools to room temperature. If allowed to remain in the mold over an hour, it will grip the chamber walls and be difficult to remove. Clean the chamber of the rifle thoroughly, then plug the bore immediately ahead of the throat with a small rag - but not so tightly it cannot be driven out. If possible, pour the molten Cerrosafe through a small tube into the bottom of the cast, gradually removing the tube as the chamber fills. If the barrel is cold, warm it to room temperature or above before making the cast. When cooled, remove from chamber, using a rod or dowel from the muzzle end of the gun.

SPECS: Sold by weight. Alloy. Infinitely reusable.

Attributes

  • Delivery weight: 0,454kg
  • UPC: 050806011908

Item details

Made in USA

Customers reviews

Customer ratings (0)

3,8 / 5

Variations:

CERROSAFE CHAMBER CASTING ALLOY 1LB
42.49 EUR 42,49 € *
Reordered
Product no.: 080027100
Reordered
42.49 EUR 42,49 € *
CERROSAFE CHAMBER CASTING ALLOY 1/2LB
25.95 EUR 102 25,95 € *
In stock
Product no.: 080027050
In stock
25.95 EUR 102 25,95 € *

Customers also bought

In stock
33,90 €
32,02 € 13,67 - 51,19 €
(Select Items on Sale!)
In stock
54,90 €
50,73 € 32,12 - 50,73 €
(Select Items on Sale!)

Did you know?

Manufacturer Information

Responsible economic operator according to EU regulation

Arxma GmbH - A Brownells Europe Company
Lahnstr. 1
24539 Neumünster
Deutschland
[email protected]

Oops! Something went wrong.

We encountered an error while loading this content. Please refresh the page to continue. If the issue persists, contact our customer support.

Back to top