ACRAGLAS® DYES BROWNELLS ACRAGLAS DYE WHITE TONER 1OZ Safety Instruction Guide
Introduction
Thank you for choosing ACRAGLAS® Dyes. This guide provides important safety instructions to ensure the safe use of our product. Please read this guide carefully before using the dye to avoid any potential hazards.
General Safety Guidelines
- Always keep the product out of reach of children and pets.
- Ensure adequate ventilation when using the dye to avoid inhalation of fumes.
- Avoid contact with skin and eyes. Use protective gloves and goggles during application.
- In case of contact with skin or eyes, rinse immediately with plenty of water and seek medical advice if irritation persists.
- Do not ingest the product. If swallowed, seek medical attention immediately.
- Store the product in a cool, dry place away from direct sunlight and heat sources.
- Dispose of any unused product in accordance with local regulations.
Specific Safety Precautions for Use
- Use only in wellventilated areas to minimize inhalation exposure.
- Wear appropriate personal protective equipment (PPE) including gloves and goggles.
- Avoid mixing with other chemicals unless specified in the instructions.
- Do not use near open flames or sources of ignition.
- Always conduct a small test patch on a nonvisible area before applying to the entire surface.
Instructions for Installation and Usage
Preparation:
- Ensure the surface to be dyed is clean and dry.
- Shake the dye bottle gently before use to ensure even mixing.
Mixing:
- Use a small amount of dye and mix with epoxy as needed to achieve desired color.
- For stock bedding, use straight dye or mix with White "Toner" to match wood for repairs.
Application:
- Apply the dye evenly using a brush or applicator.
- For fiberglass stocks, ensure the dye matches the intended paint color to avoid visible bedding lines.
Drying:
- Allow the dye to dry completely before handling the dyed item.
- Follow the epoxy manufacturer's instructions for curing time.
Cleanup:
- Clean tools and surfaces immediately after use with appropriate solvents.
- Dispose of any waste materials according to local regulations.
Disposal Instructions
- Dispose of any unused or expired product in accordance with local hazardous waste regulations.
- Do not pour down the drain or dispose of in regular trash.
- Contact your local waste management authority for guidance on safe disposal methods.
Contact Information for Further Support
For any safety inquiries or additional support, please refer to the contact information provided on the product packaging or visit the manufacturer's website.
By following these safety instructions, you can ensure a safe and effective experience with ACRAGLAS® Dyes. Thank you for your attention to these important guidelines.