MDT LSSXL Gen 2 Carbine Stock Chassis System Safety Instructions
Introduction
Thank you for choosing the MDT LSSXL Gen 2 Carbine Stock Chassis System for your Remington 700. This safety instruction guide is designed to help you understand the safe use, installation, and disposal of your product in compliance with the EU General Product Safety Regulation (GPSR). Please read this guide carefully to ensure your safety and the safety of others.
General Safety Guidelines
- Ensure that you are familiar with the operation of your firearm before installing or using this chassis system.
- Always treat your firearm as if it is loaded, even when you believe it is not.
- Store the chassis system and your firearm securely to prevent unauthorized access, especially by children or vulnerable individuals.
- Regularly inspect the chassis system for any signs of wear or damage before use.
- Follow all local laws and regulations regarding firearm modifications and usage.
- Report any unsafe products or accidents to the relevant authorities.
Specific Safety Precautions for Use
- Only use the MDT LSSXL Gen 2 Chassis System with Remington 700 rifles.
- Ensure that the chassis is properly installed before using the firearm.
- Use only AICStype detachable magazines with the chassis system.
- Do not modify the chassis system or use it in any way that is not specified in the installation instructions.
- Be aware of your surroundings and ensure that you have a safe backstop when using your firearm.
- Always wear appropriate eye and ear protection when using firearms.
Instructions for Installation and Usage
Installation Instructions
Gather Required Tools:
- Screwdriver
- Allen wrench (if necessary)
- Castle nut wrench (for buttstock installation)
Remove the Existing Stock:
- Ensure the firearm is unloaded.
- Using the screwdriver, remove the screws holding the existing stock in place.
- Carefully detach the stock from the receiver.
Install the MDT LSSXL Chassis:
- Align the chassis with the receiver.
- Secure the chassis using the screws provided in the kit.
- Ensure that all screws are tightened properly.
Attach the Buttstock:
- Install the AR carbinestyle buttstock onto the buffer tube.
- Use the castle nut wrench to secure the castle nut.
- Attach the pistol grip as per the manufacturer's instructions.
Check for Stability:
- After installation, check that the chassis is stable and securely attached to the firearm.
Usage Instructions
- Always follow safe firearm handling practices.
- Load the AICStype detachable magazine according to the manufacturer's instructions.
- Insert the magazine into the chassis until you hear a click, indicating it is securely in place.
- When ready to fire, ensure that you are in a safe environment and have taken all necessary safety precautions.
Disposal Instructions
- Dispose of the chassis system in accordance with local regulations.
- If the chassis is damaged or no longer usable, contact your local waste management service for proper disposal methods.
- Do not dispose of the chassis in regular household waste.
Contact Information for Further Support
For further inquiries or support regarding the MDT LSSXL Gen 2 Carbine Stock Chassis System, please refer to the contact information provided by the manufacturer or retailer where you purchased the product. They will be able to assist you with any questions or concerns.
Thank you for your attention to these safety instructions. Your safety and the safety of others depend on responsible use and adherence to these guidelines.