RCBS Case Lube Kit Safety Instructions
Introduction
Thank you for choosing the RCBS Case Lube Kit. This kit is designed to help you properly clean and lubricate your cases for resizing. It includes a Case Lube Pad 2, a 2ounce bottle of Case Lube 2, and two interchangeable Case Neck Brushes suitable for .22 through .30 calibers. Please read this safety instruction guide carefully to ensure safe and proper use of the product.
General Safety Guidelines
- Always follow the manufacturer's instructions for use.
- Keep the product out of reach of children and vulnerable individuals.
- Use the product in a wellventilated area to avoid inhalation of fumes.
- Avoid contact with eyes and skin. If contact occurs, rinse thoroughly with water.
- Do not ingest any of the product components.
- Store the product in a cool, dry place away from direct sunlight and heat sources.
- Regularly check for any signs of damage to the kit components before use.
- Report any unsafe product conditions or accidents to the appropriate authorities.
Specific Safety Precautions for Use
- Ensure that the work area is clean and free from clutter to avoid accidents.
- Use gloves when handling the Case Lube to prevent skin irritation.
- Avoid using the product near open flames or sparks.
- Do not mix with other chemicals unless specified by the manufacturer.
- Keep the lid tightly closed on the Case Lube bottle when not in use to prevent spills.
- If you experience any adverse reactions while using the product, discontinue use immediately and seek medical attention.
Instructions for Installation and Usage
Preparation:
- Gather all components of the kit: Case Lube Pad 2, Case Lube 2 bottle, and Case Neck Brushes.
- Ensure your work area is clean and wellventilated.
Applying Case Lube:
- Shake the Case Lube 2 bottle before use.
- Pour a small amount of Case Lube onto the Case Lube Pad 2.
- Roll or rub the cases on the pad to evenly coat them with lube.
Using Case Neck Brushes:
- Select the appropriate Case Neck Brush for your caliber.
- Insert the brush into the neck of the case and twist gently to apply lube to the interior.
Resizing Cases:
- Proceed with resizing your cases as per your reloading instructions.
- Ensure that each case is adequately lubricated to avoid damage during resizing.
Cleanup:
- After use, clean the Case Lube Pad and brushes with a suitable cleaner if necessary.
- Store all components in their original packaging or a safe place for future use.
Disposal Instructions
- Dispose of any unused or expired product in accordance with local regulations.
- Do not pour the Case Lube down the drain or dispose of it in the regular trash.
- Check with local waste management authorities for guidance on safe disposal methods.
Contact Information for Further Support
For any safety inquiries or additional information about the RCBS Case Lube Kit, please refer to the manufacturer's official website or contact your local distributor.
Thank you for following these safety instructions. Your safety and satisfaction are our top priorities. Enjoy using your RCBS Case Lube Kit responsibly!