Safety Instruction Guide for Adjustable Pillar Bedding Kits
Introduction
Thank you for choosing the Adjustable Pillar Bedding Kits from Brownells. This guide provides important safety instructions and information to ensure the safe and effective use of this product. Please read this guide carefully before use.
General Safety Guidelines
- Ensure the product is used only for its intended purpose.
- Keep the product out of reach of children and vulnerable individuals.
- Always wear appropriate personal protective equipment (PPE), such as gloves and safety goggles, when handling materials.
- Inspect all components of the kit for damage before use. Do not use damaged parts.
- Follow all instructions carefully to avoid potential hazards.
- Report any unsafe conditions or accidents to the relevant authorities.
Specific Safety Precautions for Use
- Chemical Safety:
- The ACRABED compound may cause skin irritation. Avoid direct contact with skin. Always wear gloves when handling.
- Ensure adequate ventilation when using the bedding compound to avoid inhaling fumes.
- Tool Safety:
- When using the Forstnertype drill bit, ensure that the drill is stable and securely held.
- Keep hands and other body parts away from moving parts of the drill.
- Always disconnect the drill from the power source when changing bits or making adjustments.
- Environmental Safety:
- Do not dispose of the ACRABED compound or other materials in the environment. Follow local regulations for hazardous waste disposal.
Instructions for Installation and Usage
Preparation:
- Gather all components from the kit: bedding sleeves, ACRABED cartridge, mixing tips, release agent, modeling clay, application sticks, brushes, and instructions.
- Ensure the rifle is unloaded and safe to work on.
Application Gun:
- Purchase the reusable Application Gun separately if you do not already have one.
- Load the ACRABED cartridge into the Application Gun according to the manufacturer’s instructions.
Mixing the Compound:
- Use the mixing tips to combine the ACRABED compound thoroughly before application. Follow the instructions provided for mixing ratios.
Preparing the Receiver:
- Clean the receiver area where the bedding sleeves will be installed.
- Apply the release agent on the surfaces to prevent the bedding compound from sticking.
Installing the Bedding Sleeves:
- Insert the aluminum Adjustable Pillar Bedding Sleeves into the receiver.
- Ensure the sleeves are adjusted to fit your rifle precisely. The reversible design allows for use in both flat and roundbottomed receivers.
Applying the ACRABED:
- Use the Application Gun to apply the mixed ACRABED compound around the bedding sleeves.
- Ensure even coverage and avoid overfilling.
Curing:
- Allow the bedding compound to cure as per the manufacturer’s instructions before handling the rifle.
Final Inspection:
- Once cured, check the installation for any irregularities and ensure everything is secure.
Disposal Instructions
- Dispose of any unused ACRABED compound and other materials in accordance with local regulations for hazardous waste.
- Do not throw away in regular trash. Check for local disposal centers that accept chemical waste.
Contact Information for Further Support
For any questions or concerns regarding the Adjustable Pillar Bedding Kits, please refer to the manufacturer’s website or contact the customer support service provided with your purchase.
Thank you for your attention to these safety instructions. Enjoy your project and the enhanced performance of your rifle with the Adjustable Pillar Bedding Kits from Brownells.