Safety Instruction Guide for ACTION WRENCHES DAVIDSON PORT ACTION WRENCH STOLLE NESIKA BAY (RH)
Introduction
Thank you for choosing the Davidson Action Wrenches. These tools are designed specifically for switch barrel shooters using custombuilt rifles. Please read this safety instruction guide carefully to ensure safe usage and compliance with the EU General Product Safety Regulation (GPSR).
General Safety Guidelines
- Ensure that you are familiar with the operation of your rifle and the action wrench before use.
- Always wear appropriate personal protective equipment (PPE), such as safety glasses and gloves.
- Keep the action wrench and all tools out of reach of children and vulnerable individuals.
- Inspect the tool before each use for any signs of damage or wear.
- Do not use the action wrench if it is damaged or malfunctioning.
- Always work in a welllit area to avoid accidents.
- Follow all local laws and regulations regarding firearm handling and modifications.
Specific Safety Precautions for Use
- Ensure the firearm is unloaded before attempting to use the action wrench.
- Use the action wrench only with compatible barrels and actions.
- Do not attempt to remove factoryinstalled barrels with this tool.
- When using the action wrench, ensure that the barrel is securely held in a barrel vise.
- Avoid applying excessive force when turning the wrench to prevent injury or damage.
- Use the rear action wrench through the rear of the action and utilize the 3/4 inch hex end with an appropriate wrench.
- When using the port wrench, insert it through the action port and turn it by hand only.
- Always follow the manufacturer's recommendations for installation and usage.
Instructions for Installation and Usage
Preparation:
- Ensure that the firearm is unloaded and pointed in a safe direction.
- Gather all necessary tools, including the Davidson Action Wrench and barrel vise.
Using the Rear Action Wrench:
- Insert the rear action wrench through the rear of the action.
- Attach a compatible wrench to the 3/4 inch hex end.
- Gradually apply torque to break the action free from the barrel.
- Ensure that the barrel is securely held in the barrel vise during this process.
Using the Port Wrench:
- Insert the port wrench through the action port.
- Turn the wrench by hand to break the action free from the barrel.
- Avoid using excessive force; if resistance is met, reassess the setup.
Changing Barrels:
- Once the action is free, carefully remove the barrel from the vise.
- Follow the reverse process to install a new barrel, ensuring it is properly aligned and secured.
Disposal Instructions
- Dispose of the action wrench responsibly at a designated recycling facility or according to local regulations.
- Do not dispose of the tool in general waste.
- Ensure that any hazardous materials are handled according to local waste disposal guidelines.
Contact Information for Further Support
For any questions or concerns regarding the Davidson Action Wrenches, please refer to the manufacturer's website or contact your local distributor. Always keep the product manual and safety instructions for future reference.
By adhering to these safety guidelines and instructions, you can ensure a safe and effective experience with your Davidson Action Wrenches. Thank you for prioritizing safety and compliance.